Talongrip Vise Jaw Grips (metric)

Mitee-Bite SKU: CX-MB-33050

$63.63 NZD

Only 5 left!

alonGrip™ Vise Jaw Systems

Mitee-Bite Products introduces a new and innovative product that will increase the functionality of your standard 4, 6, and 8 inch (100mm, 150mm and 200mm) vises. TalonGrip™ is a simple bolt on system that will allow you to perform aggressive machining operations while clamping on as little as .060 (1.5mm) of an inch. Ideal for small lot sizes, difficult applications or proto-type work when building a fixture would not be beneficial. TalonGrips™ are also available individually for fixturing with Pitbull® and Dyna-Force® Clamps or for soft jaw applications.

Materials that can be clamped with the jaws include any material that has a Rockwell “C” hardness of 40 or softer. Aluminum, brass, bronze, copper, composites, plastics, mild and carbon steels, high nickel materials, inconel, titanium, stainless steels, tool steels have all been gripped and machined successfully with the TalonGrip™ Systems Jaws. Brittle materials like some plastics, ceramics and composites may develop cracks and chipping from the grips. You will have to determine for yourself if the Jaws and Grips will work in those types of materials.

Torque for a typical 6″ vise is approx. 30 ft/lbs when using 2 grippers per jaw. Note: if using our large 8” jaws (p/n 32088) in vise torque to 40-45 ft/lbs. Be certain the grips penetrate the material at least .010″-.015″. More penetration is desired for softer materials such as brass, aluminum & mild steel. Jaws are not heat-treated to allow for custom modifications, grips are made from S7.

All TalonGrip™ mounting holes in our Jaws are threaded M5. For more versatility, all Jaw Sets are tapped with 2 additional holes to accept our M4 Pitbull® Clamps (M6 for 32088). This is an effective solution when downforce or additional holding force is necessary. Please contact Mitee-Bite Products with any questions.

Aggressive Stock Removal Multiple Part Fixture Application Soft Jaws

GRIPS & STOPS

Inch

(For use in Fixtures)

Part Number Description A B C C1 D Recommended Gripping Height No. Per Pack
32050 CAD Extra Grips .75 .500 .250 10-32 .060-.075 2
32020 CAD Extra Stop .50 .500 .250 .195 10-32 1
32075 CAD Fixture Grips .75 .750 .312 10-32 .060-.120 2
32100 CAD Fixture Grips .75 1.000 .312 10-32 .060-.120 2
32150 CAD Fixture Grip 1.00 1.000 .500 5/16-18 .060-.220 1

 

Metric

(Fit all Mitee-Bite TalonGrip™ Jaws)

Part Number Description A B C C1 D Recommended Gripping Height No. Per Pack
33050 CAD Extra Grips 19.05 12.7 6.35 M5 1.5mm-1.9mm 2
33020 CAD Extra Stop 12.7 12.7 6.35 4.95 M5 1
33030 CAD Extra Stop 12.7 19.05 7.92 5.59 M5 1
33075 CAD Fixture Grips 19.05 19.05 7.92 M5 1.5mm-3.0mm 2
33100 CAD Fixture Grips 19.05 25.4 7.92 M5 1.5mm-3.0mm 2
33150 CAD Fixture Grip 25.4 25.4 12.7 M8 1.5mm-5.6mm 1

 

TalonGrip-Vise-Jaws-1   TALONGRIP-chart-draw

STEEL VISE JAW SET

All Jaws threaded M5
 
Set includes 2 Jaws, 4 TalonGrips™, 1 stop with M5 screws

With Mounting Holes

Part Number Vise (metric) A (metric) B (metric) C (metric) D (metric) E (metric) Replacement Grips Replacement Stops
32044 CAD 4″ (100mm) 4.0 (100) 1.48 (37.59) 1.0 (25.4) 2.5 (63.5) .688 (17.47) 33050 (2/pk) 33020 (1 ea.)
32066 CAD 4″/6″ (100mm/150mm) 6.0 (150) 1.73 (43.94) 1.0 (25.4) 2.5/3.88 (63.5/98.55) .688/.94 (17.47/23.87) 33050 (2/pk) 33020 (1 ea.)
32068 CAD 6″ (150mm) 8.0 (200) 1.73 (43.94) 1.0 (25.4) 3.88 (98.55) .94 (23.87) 33050 (2/pk) 33020 (1 ea.)
32088* CAD 6″/8″ (150mm/200mm) 8.0 (200) 2.45 (62.23) 1.25 (31.75) 3.87/4.75 (98.3/120.65) .94/1.218 (23.88/30.94) 33075 (2/pk) 33030 (1 ea.)

*grips on .100″

 
8″ TalonGrip™ Vise Jaw System (32088)
talon


Without Mounting Holes

Part Number Vise (metric) A (metric) B (metric) C (metric) D (metric) E (metric) Replacement Grips Replacement Stops
33044 CAD 4.0 (100) 1.48 (37.59) 1.0 (25.4) 33050 (2/pk) 33020 (1 ea.)
33066 CAD 6.0 (150) 1.73 (43.94) 1.0 (25.4) 33050 (2/pk) 33020 (1 ea.)
33068 CAD 8.0 (200) 1.73 (43.94) 1.0 (25.4) 33050 (2/pk) 33030 (1 ea.)